Program table :
| Mode |
Effects |
Mode |
Flux(±5%) |
| 1 |
Static white |
12 |
Red/Green color jump |
| 2 |
Static Red |
13 |
Red/ Green gradually change |
| 3 |
Static Green |
14 |
Red/Blue jump |
| 4 |
Static Blue |
15 |
Red/Blue gradually change |
| 5 |
Static Purple |
16 |
Green/Blue jump |
| 6 |
Static Yellow |
17 |
Green/Blue gradually change |
| 7 |
Static Sky blue |
18 |
Single color chasing forward like flowing water |
| 8 |
R/G/B single color jumps |
19 |
Single color chasing reverse like flowing water |
| 9 |
R/G/B single color gradually change |
20 |
R/G/B single color jumping and strobing |
| 10 |
Full colors Jump |
21 |
Full colors jumping and strobing |
| 11 |
Full colors gradually change |
|
|
Dimension:
Connection Drawing :
Operating Instruction :
1. ON/OFF key ;
2. Pause Key;
3. Speed up;
4. Speed down
5. Increase the brightness;
6. Decrease the brightness;
7. Mode key( from single color changing mode to full color changing mode)
8.Opposite Mode key ( from full color changing mode to single color changing mode)
Note of LED Controller :
● Installation, try to avoid the minefields, strong magnetic field and high-pressure region.
● Ensuring a solid connection correctly in order to avoid short-circuit damage to components and trigger fires
● 12V / 24V LED Controller is installed in a well-ventilated place to ensure appropriate environmental temperature.
● Using this product, please check the local voltage, power adapter is in line with product requirements, whether the definition of positive and negative power supply and product line
● To prohibit the live wiring, check to confirm wiring is correct, check the no short-circuit, and then power.
● In case of failures, do not maintenance in private.
